Parts

Shark Robot Vacuum Parts by Model

How to match a filter, brush roll, side brush or battery to your Shark robot, what Shark's own owner's guides say about replacing each one, and which genuine and compatible parts we link.

As an Amazon Associate we earn from qualifying purchases, at no cost to you. How we make money.

Shark robot vacuum replacement parts: filter, brush roll and side brushes laid out beside a robot vacuum

A Shark robot that leaves lines of dirt behind, whines louder than it used to or drags a clump of hair across the floor is usually asking for maintenance, not a new robot. The parts that wear are small next to the robot: the filters, the brush roll, the side brushes and, eventually, the battery. The hard part is buying the right ones, because Shark sells many robot families and the parts are not interchangeable across them.

This page shows how to identify your robot, what Shark's own owner's guides say about cleaning and replacing each part, and which parts we link: genuine Shark parts first, then a few named third-party kits that publish a model list. It is a parts guide built on two Shark manuals, not a ranking. If the robot has stopped charging or needs a reset, start with our Shark robot vacuum not charging and how to reset a Shark robot vacuum guides before you spend anything.

How We Wrote This Page

We do not run a test lab and we do not claim to have tested any part. The care intervals come from two Shark owner's guides that we read, and anything those guides do not say is marked "not stated". The parts come from an Amazon search on November 20, 2026, and each one is matched to the model list in its own listing.

  • Model first

    Every part is matched to a model number, never to a robot's name alone.

  • Intervals by source

    Replacement timing is credited to the Shark guide it comes from.

  • Genuine or not

    We say whether a part is made by Shark or by someone else.

  • Not stated means not stated

    Where a Shark guide is silent, the table says so.

Sources read on November 20, 2026. No brand paid to be on this page or saw it before publication. When you buy through our links we may earn a commission from Amazon; it never changes what we say.

Find Your Model Number

Start here, because every other step depends on it. Shark names its robots in families such as the IQ Robot, the Matrix, the AI robots and the older ION robots, and inside each family there are several model numbers that differ in the base, the mop and sometimes the brush. A filter that fits one can be wrong for the next.

Where the Number Is

The model number is printed on a label on the robot itself, on the box it came in and on the manual. If the label is not obvious, turn the robot over and check the underside before you assume anything. The number is letters followed by digits, such as the RV1000 Series on Shark's IQ Robot guide or the RV2502AE Series on its AI Ultra guide, both of which we read.

Series Number Versus Full Model Number

Shark's guides are written for a series, while shops list full model numbers with extra letters on the end. Match the series digits first, then the full number. If a listing names your series but not your exact model, treat that as a maybe, not a yes.

The Official Place to Check

Both Shark guides we read point owners to sharkaccessories.com for replacement filters and parts, and the AI Ultra guide also names sharkclean.com/AIRobotSE for replacement filters. That is the place to enter your model number and see what Shark itself lists for it.

Filters by Model

Most Shark robots have a filter in the robot's dust bin, and the self-emptying bases have their own. The table shows what we could confirm from Shark's own text. Where we did not open a Shark guide for a family, we say so instead of filling the cell from a reseller.

The IQ Robot (RV1000 Series)

Shark's guide says to clean the robot filter once a month and replace it every six months. It says not to use water on that filter and to lightly tap it to dislodge dust. It also says to use only Shark-branded filters and accessories, and that failing to do so will void the warranty.

The AI Ultra With XL HEPA Self-Empty Base (RV2502AE Series)

This guide gives a different routine. The robot's own filter is cleaned after each use: you tap it to remove debris every time you empty the dust bin. The base has two sets of filters, and the guide says to clean the pre-motor foam and felt filters once a month and the post-motor filter once a year. Those are rinsed in cold water only, never with soap, and left to air-dry for at least 24 hours before they go back in. The guide gives no replacement interval for the robot's filter, so we do not invent one.

Other Families

We did not open a Shark guide with a filter schedule for the Matrix, PowerDetect or ION families, so we do not give one. Open the manual for your series, then use your model number at sharkaccessories.com.

Shark family
IQ Robot (RV1000 Series)
AI Ultra (RV2502AE Series)
Matrix
PowerDetect
ION
Clean the robot filter Once a month, tap only, no water After each use, tap when you empty the bin Not stated Not stated Not stated
Replace the robot filter Every six months Not stated in the guide Not stated Not stated Not stated
Base filters Not stated Pre-motor monthly, post-motor yearly, cold water only Not stated Not stated No self-empty base
Where Shark sends you sharkaccessories.com sharkaccessories.com and sharkclean.com/AIRobotSE Check your model's manual Check your model's manual Check your model's manual

IQ Robot (RV1000 Series)

Show specifications
Clean the robot filter
Once a month, tap only, no water
Replace the robot filter
Every six months
Base filters
Not stated
Where Shark sends you
sharkaccessories.com

AI Ultra (RV2502AE Series)

Show specifications
Clean the robot filter
After each use, tap when you empty the bin
Replace the robot filter
Not stated in the guide
Base filters
Pre-motor monthly, post-motor yearly, cold water only
Where Shark sends you
sharkaccessories.com and sharkclean.com/AIRobotSE

Matrix

Show specifications
Clean the robot filter
Not stated
Replace the robot filter
Not stated
Base filters
Not stated
Where Shark sends you
Check your model's manual

PowerDetect

Show specifications
Clean the robot filter
Not stated
Replace the robot filter
Not stated
Base filters
Not stated
Where Shark sends you
Check your model's manual

ION

Show specifications
Clean the robot filter
Not stated
Replace the robot filter
Not stated
Base filters
No self-empty base
Where Shark sends you
Check your model's manual

Brush Rolls and Side Brushes

These two parts wear fastest, because they do the physical work and they are where hair collects. The main brush roll sits under the robot behind an access door. The side brushes sit at the edge and sweep dirt toward the middle.

The Brush Roll

Both guides say to replace the brushroll every 6 to 12 months, or when it is visibly worn. To clean it, you push up on the tabs of the brushroll access door, lift the door off, lift the brushroll out and clear off the hair and debris. Shark describes it as a self-cleaning brushroll that removes hair wrap while the robot cleans, so if some debris stays wrapped, the AI Ultra guide says to keep running the robot before you cut anything away by hand. The IQ guide also says to clear hair from the Anti-Tangle Comb on the back of the dust bin.

The Side Brushes

Neither guide gives a fixed interval for side brushes. Both say to remove and replace any side brush that is bent or damaged, and to lift a brush off its peg to remove it. To clean them, unwind string or hair wrapped around the brushes and wipe them with a cloth; the IQ guide says a damp cloth and a complete air dry before reinstalling, the AI Ultra guide says a dry cloth.

The Front Wheel

The IQ guide says to replace the front wheel every 12 months and gives no part number. The AI Ultra guide says only to clean the front wheel housing periodically.

Part
Clean
Replace
Source
Robot filter, IQ Robot RV1000 Series Monthly, no water Every six months IQ Robot guide
Robot filter, AI Ultra RV2502AE Series After each use, tap clean Not stated AI Ultra guide
Base pre-motor foam and felt filters, RV2502AE Series Once a month, cold water, dry 24 hours Not stated AI Ultra guide
Base post-motor filter, RV2502AE Series Once a year, cold water, dry 24 hours Not stated AI Ultra guide
Brushroll, both series When hair or debris is visible Every 6 to 12 months, or when visibly worn Both guides
Side brushes, both series As needed, unwind hair and wipe When bent or damaged; no interval stated Both guides
Front wheel AI Ultra: clean the housing periodically IQ Robot: every 12 months Both guides
Base dust bin, RV2502AE Series Empty when full; holds up to 60 days Not a consumable AI Ultra guide

Clean

Show specifications
Robot filter, IQ Robot RV1000 Series
Monthly, no water
Robot filter, AI Ultra RV2502AE Series
After each use, tap clean
Base pre-motor foam and felt filters, RV2502AE Series
Once a month, cold water, dry 24 hours
Base post-motor filter, RV2502AE Series
Once a year, cold water, dry 24 hours
Brushroll, both series
When hair or debris is visible
Side brushes, both series
As needed, unwind hair and wipe
Front wheel
AI Ultra: clean the housing periodically
Base dust bin, RV2502AE Series
Empty when full; holds up to 60 days

Replace

Show specifications
Robot filter, IQ Robot RV1000 Series
Every six months
Robot filter, AI Ultra RV2502AE Series
Not stated
Base pre-motor foam and felt filters, RV2502AE Series
Not stated
Base post-motor filter, RV2502AE Series
Not stated
Brushroll, both series
Every 6 to 12 months, or when visibly worn
Side brushes, both series
When bent or damaged; no interval stated
Front wheel
IQ Robot: every 12 months
Base dust bin, RV2502AE Series
Not a consumable

Source

Show specifications
Robot filter, IQ Robot RV1000 Series
IQ Robot guide
Robot filter, AI Ultra RV2502AE Series
AI Ultra guide
Base pre-motor foam and felt filters, RV2502AE Series
AI Ultra guide
Base post-motor filter, RV2502AE Series
AI Ultra guide
Brushroll, both series
Both guides
Side brushes, both series
Both guides
Front wheel
Both guides
Base dust bin, RV2502AE Series
AI Ultra guide

The Self-Empty Base: Bags or No Bags?

This is the question we get most for a self-emptying robot, and the answer depends on the family. The AI Ultra with XL HEPA Self-Empty Base is a bagless design. Its guide describes a Base Dust Bin that holds up to 60 days of dust and debris, which you detach, empty into the trash and slide back in. There is no bag to buy for that base. What wears in it is the pair of filters, the pre-motor foam and felt filters and the post-motor filter, and Shark lists the pre-motor set as a replacement part.

We did not open a Shark page that shows a disposable bag for any Shark robot base, so we link none. If your base takes a bag, look up the bag by your model number at sharkaccessories.com. For a robot with a bagged dock from another maker, see our Roomba bags guide.

Battery

If the robot runs short or will not hold a charge, the battery is the part that matters, and it is the one where a wrong guess costs the most. Both Shark guides we read say to use battery RVBAT850 when you replace it, and the IQ guide warns that using other batteries and chargers may create a risk of fire. The IQ guide also says to use only the Shark charging dock XSKDOCK100 with that robot, and the IQ guide says the battery sits behind a screwed cover and is replaceable only by skilled persons.

Battery numbers do not carry across families. For the RVBAT850 itself, search Amazon for RVBAT850 and match the part number on the listing to your manual. The genuine battery we link is a different part number, RVBAT85004, and its listing says it fits only the older ION RV850 family. Before any purchase, check the number in your own manual and rule out the cheap causes in our Shark robot vacuum not charging guide, such as dirty contacts or a dock without power.

We link five parts. Two are made by Shark: an ION robot replenishment kit and an ION battery. Three are named third-party items that publish a list of the models they fit: an IQ kit, an AI kit and a pre-motor foam filter set that covers both. Pick by model first, then by what you need to replace.

Part
Shark ION Replenishment Kit RVFRK700
Shark Battery RVBAT85004
Bvhonwe IQ Accessories Kit
PAYUDAL AI Parts Kit
Bvhonwe Base Foam Filters
Part Shark robot vacuum replacement parts: genuine ION replenishment kit with side brushes, brushroll and filter Shark robot vacuum replacement parts: genuine RVBAT85004 battery for ION robots Shark robot vacuum replacement parts: IQ accessories kit with brush, filters and side brushes Shark robot vacuum replacement parts: AI kit with brushes and base and robot filters Shark robot vacuum replacement parts: foam and felt base pre-motor filters for IQ and AI robots
Made by Shark Shark Bvhonwe PAYUDAL Bvhonwe
What it is Kit: 4 side brushes, 1 brushroll, 1 filter, 1 cleaning tool Battery pack, 14.4V Kit: brush, filters, 6 side brushes, base foam and felt filter Kit: 2 brushes, 10 side brushes, robot and base filters 6 foam and 6 felt base pre-motor filters
Fits (per listing) No models named; confirm before ordering ION RV850 family and RV871 only IQ RV1001AE, RV1000 and related IQ and EZ models AI AV2501, RV2502AE and related; not IQ or EZ IQ RV1001AE and AI RV2502AE and related
Right for an IQ RV1000 Series robot Not named No Named No Base filters only if your IQ has the self-empty base
Right for an AI Ultra RV2502AE Series robot Not named No No Named Named

Shark ION Replenishment Kit RVFRK700

Show specifications
Made by
Shark
What it is
Kit: 4 side brushes, 1 brushroll, 1 filter, 1 cleaning tool
Fits (per listing)
No models named; confirm before ordering
Right for an IQ RV1000 Series robot
Not named
Right for an AI Ultra RV2502AE Series robot
Not named

Shark Battery RVBAT85004

Show specifications
Made by
Shark
What it is
Battery pack, 14.4V
Fits (per listing)
ION RV850 family and RV871 only
Right for an IQ RV1000 Series robot
No
Right for an AI Ultra RV2502AE Series robot
No

Bvhonwe IQ Accessories Kit

Show specifications
Made by
Bvhonwe
What it is
Kit: brush, filters, 6 side brushes, base foam and felt filter
Fits (per listing)
IQ RV1001AE, RV1000 and related IQ and EZ models
Right for an IQ RV1000 Series robot
Named
Right for an AI Ultra RV2502AE Series robot
No

PAYUDAL AI Parts Kit

Show specifications
Made by
PAYUDAL
What it is
Kit: 2 brushes, 10 side brushes, robot and base filters
Fits (per listing)
AI AV2501, RV2502AE and related; not IQ or EZ
Right for an IQ RV1000 Series robot
No
Right for an AI Ultra RV2502AE Series robot
Named

Bvhonwe Base Foam Filters

Show specifications
Made by
Bvhonwe
What it is
6 foam and 6 felt base pre-motor filters
Fits (per listing)
IQ RV1001AE and AI RV2502AE and related
Right for an IQ RV1000 Series robot
Base filters only if your IQ has the self-empty base
Right for an AI Ultra RV2502AE Series robot
Named
Shark genuine ION robot replenishment kit RVFRK700 with side brushes, brushroll, filter and cleaning tool

Top pick · Best genuine kit for an older ION robot

Shark ION Robot Replenishment Kit RVFRK700

The kit to buy when you own an older Shark ION robot and want brushes and a filter from Shark itself. The listing sells it as a genuine Shark kit with four side brushes, one main brushroll, one filter and one cleaning tool.

  • Budget
at Amazon

Check price on Amazon

Buy it if
You own an ION robot, have confirmed the kit number against your manual, and want the maker's parts rather than a third-party set.
Skip it if
Your robot is an IQ, AI or Matrix model. The listing names no robot models, so this is not a safe guess for those families.

The title carries the Shark part number RVFRK700 and the brand field reads Shark. The listing text asks you to confirm compatibility before purchase and does not name the robots it fits, so match the number to your own manual first. It is sold by a third-party seller on Amazon rather than by Shark itself, which is why the fit check matters more than usual.

What stands out

  • Genuine Shark kit, per the listing
  • Four side brushes, a brushroll, a filter and a cleaning tool in one box
  • Covers the three parts that wear fastest

Trade-offs

  • The listing names no robot models
  • Sold by a third-party seller, not by Shark
  • No use for IQ, AI or Matrix robots
Shark genuine RVBAT85004 14.4V battery for ION RV850 robot vacuums

Best genuine battery for an ION RV850 robot

Shark Genuine RVBAT85004 Battery for ION RV850

The battery to buy when your robot is on the list and you want Shark's own pack. The listing says it is an OEM part, number RVBAT85004, and that it only fits the RV850 and RV871 ION models it names.

  • Budget
at Amazon

Check price on Amazon

Buy it if
You own an ION RV850, RV850C, RV851 or RV871 series robot that no longer holds a charge, and you have ruled out dirty contacts and a dead dock.
Skip it if
Your robot is an IQ or AI model. Shark's guides for those name RVBAT850, which is a different part number than this one.

The listing names the models it fits, from the RV850 and RV850C up to the RV871 and RV871RC, and says it is a wearable part that Shark's warranty does not cover for normal wear and tear. It lists a 14.4V, 2000mAh pack. Match the part number printed on your current battery to RVBAT85004 before you order.

What stands out

  • Genuine Shark OEM part, per the listing
  • Lists the ION models it fits by number
  • Avoids the fit and safety risk of an unnamed pack

Trade-offs

  • Fits only the ION RV850 and RV871 family
  • Not the RVBAT850 that the IQ and AI guides name
  • Sold by a third-party seller, not by Shark
Bvhonwe accessories kit for Shark IQ robot vacuums with main brush, side brushes and filters

Best compatible kit for a Shark IQ robot

Bvhonwe Accessories Kit for Shark IQ

The kit to consider when you own an IQ robot and want a full set of brushes and filters in one order. It is not a Shark part. The listing names the RV1001AE, RV1000 and related IQ and EZ models.

  • Budget
at Amazon

Check price on Amazon

Buy it if
You own an IQ robot from the RV1000 family, you are out of warranty or accept the fit risk, and you want spare side brushes and filters at once.
Skip it if
Your robot is still under warranty and you want to follow Shark's use-only-Shark-parts rule, or your robot is an AI, Matrix or ION model.

The listing says the kit holds one main brush, three filters, six side brushes, a pre filter, a filter, a pre-motor foam and felt filter and a cleaning tool. The seller says to replace the parts every 2 to 4 months. That is the seller's number, not Shark's; the IQ guide says to replace the filter every six months and the brushroll every 6 to 12 months. Follow Shark's guide, and treat the extra parts as spares.

What stands out

  • Listing names the IQ models it fits
  • One order covers brush, filters and side brushes
  • Six side brushes make a long supply of spares

Trade-offs

  • Not made by Shark, so Shark may not honor the warranty for a fault traced to it
  • The seller's 2 to 4 month interval is far shorter than Shark's
  • Not for AI, Matrix or ION robots
PAYUDAL replacement parts kit for Shark AI Ultra robot vacuums with brushes and filters

Best compatible kit for a Shark AI Ultra robot

PAYUDAL Replacement Parts Kit for Shark AI Ultra

The kit to consider when you own an AI robot with the self-empty base and want robot and base filters together with brushes. It is not a Shark part. The listing names the AV2501, RV2502AE and related AI models and says it does not fit IQ, EZ or UR1000 robots.

  • Budget
at Amazon

Check price on Amazon

Buy it if
You own an RV2502AE or a related AI Ultra and want the base pre-motor and post-motor filters plus brushes in one order.
Skip it if
Your robot is an IQ, EZ or Matrix model, or you want to stay with Shark-branded parts for warranty reasons.

The listing says the kit holds 2 roller brushes, 10 side brushes, 4 robot pre-motor HEPA filters, 2 pre-motor prefilters, 4 base foam filters, 4 base felt filters, a base post-motor HEPA filter and a base post-motor foam filter. The seller suggests changing the brush and filter every 2 to 3 months. For a Shark guide, the brushroll is 6 to 12 months and the base filters are cleaned monthly and yearly, so most of this kit is spares.

What stands out

  • Listing names the AI models it fits and says which robots it does not
  • Covers both the robot and the self-empty base filters
  • Includes the post-motor filter that Shark says to clean yearly

Trade-offs

  • Not made by Shark
  • More parts than most owners need
  • The seller's 2 to 3 month interval is far shorter than Shark's
Bvhonwe foam and felt base pre-motor filters for Shark IQ and AI Ultra self-empty bases

Best compatible filter set for the IQ and AI base

Bvhonwe Base Pre-Motor Foam Filters for Shark IQ and AI (6 pack)

The filter set to buy when the self-empty base is the only thing that needs refreshing. The listing names IQ models such as the RV1001AE and AI models such as the AV2501 and RV2502AE.

  • Budget
at Amazon

Check price on Amazon

Buy it if
You own an IQ or AI robot with a self-empty base, you wash the pre-motor filters monthly as Shark says, and you want clean ones to swap in while the others dry.
Skip it if
Your robot has no self-empty base, or you need the robot's own filter or the post-motor filter, which this set does not include.

The listing describes six foam filters and six felt filters, washable and reusable. Shark's AI Ultra guide says the pre-motor set needs cleaning once a month and a 24 hour air dry, so a second set to swap in is the practical use. Reinstall the felt filter first and the foam filter on top, as Shark's guide says.

What stands out

  • Listing names both IQ and AI models
  • Six foam and six felt filters give you a swap set for the monthly wash
  • Washable and reusable, per the listing

Trade-offs

  • Not made by Shark
  • Does not include the post-motor filter
  • No use for a robot without a self-empty base

How Often to Replace Each Part

Every interval on this page comes from one of two Shark guides, so treat it as a starting point and check the manual for your own model. Shark does not give the same schedule for every family, and a robot in a house with pets or long hair will wear brushes faster than one on bare floor.

The Schedule in Shark's Guides

For the IQ Robot RV1000 Series: clean the filter monthly and replace it every six months, replace the brushroll every 6 to 12 months, replace side brushes when they are bent or damaged, replace the front wheel every 12 months. For the AI Ultra RV2502AE Series: tap the robot filter clean after each use, clean the base pre-motor filters monthly and the post-motor filter yearly, replace the brushroll every 6 to 12 months, replace side brushes when bent or damaged. The guides give no replacement interval for the AI Ultra's filters.

Signs a Part Is Due Sooner

The calendar is only a guide. A brush roll that is frayed, a side brush that no longer reaches the floor, or a filter that stays grey after tapping are all reasons to replace early. A robot that suddenly sounds different or picks up less is worth a quick look at all three before you suspect anything else.

What We Will Not Claim

Third-party listings print much shorter intervals, such as every two or three months. Those are the sellers' numbers, not Shark's, and a seller that sells replacement parts has a reason to like a short interval. Shark's online support pages sit behind a bot check that our tools could not pass, so we relied on the guides themselves; if a Shark FAQ for your model says something different, follow the FAQ.

How to Replace a Shark Robot Brushroll

  1. Turn the power off

    Shark's guide says to turn off power before any maintenance. Press and hold the CLEAN button for 5 to 7 seconds, or use the power switch on the robot, then turn the robot over.

  2. Open the brushroll door

    Push up on the tabs on the brushroll door, then lift the door off.

  3. Lift out the old brushroll

    Lift the brushroll out. If you are only cleaning it, remove any hair now; if it is frayed or worn, it is the one to replace.

  4. Fit the new one

    Reinstall the brushroll, inserting the flat end first, as the AI Ultra guide says. Check that the part is the one for your model before you fit it.

  5. Close the door

    Close the brushroll door and press down until both sides click into place. Run a short clean and watch that the brush spins.

Genuine Parts vs Compatible Kits

This is where honesty matters more than a recommendation. The IQ guide says to use only Shark-branded filters and accessories, and that failing to do so will void the warranty. That is Shark's position, and it is also a sensible rule while your robot is under warranty.

Genuine First

Shark's guides send owners to sharkaccessories.com for replacement filters and parts. That is the place to buy a part made by Shark for your model. On Amazon we found two genuine Shark parts sold new, and we link both, with their limits stated above. We did not find a new genuine brushroll, side brush or base filter for the IQ or AI robots on Amazon, which is why the compatible kits are on this page at all.

If You Choose a Compatible Kit

We link only kits from named brands that publish a model list. Check that the listing names your exact model number, not just the series. Count what is in the box against what you need, because a pack of ten side brushes is no bargain for a robot that takes two. Keep the original part until the new one is installed, so you can compare the shape. And understand that you take on the fit risk and that Shark may not honor the warranty for a fault it traces to a non-Shark part.

What We Skipped

Our search also returned many multi-part packs from sellers without a recognisable brand, with titles that run through a long list of Shark model numbers. We do not link them. A pack from a company we cannot name, with a fit claim we cannot check against a Shark page, is not something we can stand behind.

When a New Robot Makes More Sense

Parts are the cheap fix, but they are not always the right one. If the robot is several years old, the battery is failing, the brush roll and side brushes need replacing at the same time and the robot has never cleaned the way you hoped, a new robot may be the better spend.

If You Stay With Shark

Our Shark ION robot vacuum reviews cover the older families, our Shark Matrix guide covers the Matrix line and our Shark PowerDetect guide covers that line. Each says who a robot is for and who should skip it.

If You Are Not Sure

Our parts finder helps you match parts to a robot, and the robot vacuum parts map links the guides for every brand we cover. Add up what the filters, brush roll, side brushes and battery would cost together, and if that is a large share of a new robot, that tells you something.

Shark Robot Parts FAQ

For the Shark IQ Robot RV1000 Series, remove and empty the dust bin, pull the filter out by its tabs, tap it clean or fit the new one, then slide the dust bin back into the robot. On the AI Ultra self-empty base, reinsert the felt filter first, then the foam filter. Other Shark families differ, so check the manual for your model.
No. Shark makes many families, and its manuals tell owners to use parts made for their model. Match your series and full model number before you buy a filter, brush roll or side brush, and look the part up at sharkaccessories.com, which both Shark guides we read point to.
For the Shark IQ Robot RV1000 Series, Shark's guide says to clean the filter once a month and replace it every six months. The AI Ultra RV2502AE guide gives cleaning steps but no replacement interval for its filters. We did not open a Shark filter schedule for other families, so check the manual for your model.
It depends on the filter. Shark's IQ guide says not to use water on the robot filter and to tap it clean instead. On the AI Ultra base, the guide says to rinse the pre-motor and post-motor filters in cold water only, with no soap, and to let them air-dry for at least 24 hours before reinstalling.
The AI Ultra with XL HEPA Self-Empty Base is bagless. Shark's guide describes a base dust bin that holds up to 60 days of debris and is emptied into the trash. We did not open a Shark page showing a bag for any Shark robot base, so check your own model's guide.
They can be, if the listing names your exact model and you are out of warranty. Shark's guide says to use only Shark-branded filters and accessories, so a compatible part carries the fit risk and may affect warranty cover. We link only named brands with a model list, and we treat their short replacement intervals as the seller's, not Shark's.

Sources

  1. Shark, IQ Robot RV1000 Series owner's manual, maintenance pages, as reproduced on ManualsLib, read on November 20, 2026 Source for the monthly filter cleaning, the six month filter replacement, the no water rule, the brushroll interval and cleaning steps, the Anti-Tangle Comb and the pointer to sharkaccessories.com.
  2. Shark, IQ Robot RV1000 Series owner's manual, side brush and wheel pages, as reproduced on ManualsLib, read on November 20, 2026 Source for the side brush care, replacing bent or damaged brushes, the 12 month front wheel replacement and the sharkaccessories.com pointer.
  3. Shark, IQ Robot RV1000 Series owner's manual, safety pages, as reproduced on ManualsLib, read on November 20, 2026 Source for battery RVBAT850, the XSKDOCK100 charging dock and the rule to use only Shark-branded filters and accessories.
  4. Shark, RV2502AE Series AI Ultra Robot Vacuum with XL HEPA Self-Empty Base owner's guide, maintenance and replacement parts pages, as reproduced on Manuals+, read on November 20, 2026 Source for the monthly pre-motor and yearly post-motor filter cleaning, the cold water and 24 hour drying rules, the 60 day base dust bin, the 6 to 12 month brushroll interval, battery RVBAT850 and the pointers to sharkaccessories.com and sharkclean.com/AIRobotSE.
  5. Amazon listing, Genuine Shark ION Robot Full Replenishment Kit RVFRK700 (B07GSDK14T), read on November 20, 2026 Source for the kit contents, the Shark brand and the request to confirm compatibility.
  6. Amazon listing, Shark Genuine RVBAT85004 battery for ION robots (B0DQK1257Z), read on November 20, 2026 Source for the OEM part number, the ION RV850 and RV871 fit list and the wearable part warranty note.
  7. Amazon listing, Bvhonwe Accessories Kit for Shark IQ (B0C39TS1G6), read on November 20, 2026 Source for the kit contents, the IQ and EZ model list and the seller's replacement interval.
  8. Amazon listing, PAYUDAL Replacement Parts Kit for Shark AI (B0BTCZMFB9), read on November 20, 2026 Source for the kit contents, the AI model list, the not compatible note for IQ and EZ and the seller's replacement interval.
  9. Amazon listing, Bvhonwe Base Pre-Motor Foam Replacement Filters for Shark IQ and AI (B0BGL8DNW2), read on November 20, 2026 Source for the 6 foam and 6 felt filter count and the IQ and AI model list.