Care guide

Roborock Cleaning Solution: What Goes in the Tank

What Roborock says about putting floor cleaner in a robot mop, the dilution figures it publishes, which docks dose detergent for you, and what to check before you buy a third-party bottle.

By The RobotVacuumer team Updated

As an Amazon Associate we earn from qualifying purchases, at no cost to you. How we make money.

Roborock cleaning solution being poured into a robot vacuum dock water tank

Plain water mops fine, and for many homes that is the whole answer. The question comes up when a floor has dried-on marks, a kitchen has a greasy film, or you simply want the floor to smell clean, and the robot has a tank that looks like it was made to hold a splash of cleaner. Then it matters what Roborock actually says, because the tank, the pump and the mop head are the parts a wrong bottle can damage.

This guide sticks to what Roborock publishes: its support articles and the product page for its own floor cleaning solution. Where the maker's pages disagree with each other, we show both figures instead of picking one. Where Roborock says nothing, we say that, and we do not fill the gap with a rule that sounds right. Every source is listed at the end with the date we read it.

We keep this about Roborock. Other brands have their own rules, and the care guidance here does not carry over to them.

Roborock's Official Floor Cleaning Solution

Roborock sells its own floor cleaner for robots that mop. The product page lists a 480 ml bottle and says it is compatible with all Roborock robot vacuums with mopping, and that it is made to be used with Roborock products. The Amazon listing, which is sold by Roborock itself, gives the size as 16.23 fl oz and describes the cleaner as made for hardwood, tile and other hard floors, with a dilution ratio of 1:200.

Two things are worth knowing before you order. First, a floor cleaner is a hard-floor product: it is for the mopping side of the robot, so it does nothing for a vacuum-only run or for carpet. Second, the product page carries a safety note. It says the solution may cause an allergic skin reaction because it contains benzisothiazolinone, and it says to keep it away from children and pets. Store the bottle where you would store any household cleaner.

Roborock official floor cleaning solution bottle for robot vacuums with mopping

Top pick · Best for following the maker's guidance

Roborock Floor Cleaning Solution

The one cleaner Roborock's support articles name for the water tank. It is the choice when you want to follow the maker's guidance to the letter.

  • Budget
at Amazon

Check price on Amazon

Buy it if
You own a Roborock that mops, you want the floor cleaner Roborock itself points to, and you are happy to dilute it as your manual says.
Skip it if
You only run vacuum-only cleaning, or your robot is another brand. The product page says the solution is made for Roborock products.

The listing states a 480 ml (16.23 fl oz) bottle, a 1:200 dilution ratio and use on hardwood, tile and other hard floors, and names Roborock Technology Co. Ltd as the seller. The product page adds that you do not dilute it when you pour it into a solution cartridge, and that it is meant for all Roborock robots that mop. The listing does not state how many mopping runs a bottle covers, so we do not give a number.

What stands out

  • Named by Roborock's own support articles as the cleaner for the water tank
  • Listing and product page both state a dilution ratio
  • Sold by Roborock itself on Amazon

Trade-offs

  • Only useful for the mopping side of the robot
  • Contains benzisothiazolinone, so keep it away from children and pets
  • Roborock's own pages give two different tank dilution figures

How Much Roborock Cleaning Solution to Use

The honest answer starts with a conflict. Roborock's product page for the solution says to dilute it at 1:200 and gives an example: 2.5 caps, which it states as 20 ml, mixed with 4 liters of water. Roborock's support article on adding cleaner to the water tank, which we read on November 19, 2026, says to dilute it at 1:300 before use. Both are Roborock pages, and they do not agree.

Our advice is to take the figure from the manual that came with your robot or from the Roborock app for your model, because that is the document written for your tank and pump. If you cannot find it, the weaker of the two figures is the cautious start, since too strong a mix is what can cause trouble with bubbles in the tank, which the support article warns about. That choice is ours, not Roborock's, and we label it that way.

Pouring It Into the Manual Tank

When your robot has a clean water tank you fill yourself, Roborock's support articles allow only Roborock's own floor cleaner in it. The article titled "Can I add cleaning solution into Clean Water Tank?", last updated on November 18, 2026, says to use only Roborock branded floor cleaner in the water tank to prevent corrosion or damage. Mix the solution with the water outside the robot to the ratio in your manual, then fill the tank with the mixture. The pages do not describe a mixing method, so this is the ordinary way to mix a diluted cleaner and not a Roborock step.

Using the Cartridge or the Dock Dispenser

The product page says that if your Roborock has a solution cartridge, you pour the solution straight into the cartridge with no dilution. Dilution in that case is handled by the machine. That matters because it means the 1:200 figure above is for hand mixing, not for a cartridge.

Roborock's support article on the Saros 10 multifunctional dock says the dock has an auto detergent dispenser. We found no Roborock page that states a fill amount or a number of runs per fill for it, so we do not give one. Use the amount the dock's own instructions in the app or manual show.

What Roborock Says Not to Use

Roborock's guidance here is a recommendation to use its own cleaner, not a list of banned chemicals. We read two support articles and one product page, and none names vinegar, bleach or any other specific product as forbidden. We say so plainly because many pages online do print such lists and attribute them to the maker.

What Roborock does say is this:

  • Use only Roborock branded floor cleaner in the water tank, to prevent corrosion or damage (support article updated November 18, 2026).
  • It is recommended to use only Roborock cleaning solution in the water tank (support article on adding cleaner when mopping).
  • Other cleaning solutions may have different formulations that could potentially damage the water tank (same article).
  • Bubbles produced by chemical substances in cleaners may cause the mopping feature to malfunction (same article).

Where the Risk Sits

Read together, the articles name three things to protect: the water tank, the corrosion and damage risk that comes with other formulas, and the mopping function itself, which foam can upset. They do not name the pump or the seals, and we will not put those words in Roborock's mouth. A cleaner that foams is the thing to think about first, because Roborock names bubbles directly.

Why We Do Not Publish a Banned List

A list of household products with a skull next to each would read as authority, but without a Roborock sentence behind each item it is a guess. If you want to use something other than Roborock's own bottle, you are going beyond what the maker recommends, and the manual or Roborock support is the place to ask first. Keep in mind that going beyond the recommended cleaner is your call on the warranty question, and we have not found a Roborock page that settles it either way.

Third-Party Solutions: What to Check

Plenty of bottles on Amazon say they are made for Roborock. They are not Roborock's product, and Roborock's own pages only recommend its own. If you still want to look at one, these are the things to read on the listing before you buy. They are criteria we use to read a listing, not claims about any specific brand.

A Stated Dilution Ratio and a Compatibility Statement

A bottle that gives a clear ratio and says which kind of robot it is for is easier to use correctly than one that gives neither. If a listing does not say how much to put in a tank of a given size, you are guessing at the strength, and strength is where bubbles come from.

Low-Foam Wording and the Ingredient List

Because Roborock names bubbles as a cause of mopping problems, look for a product that says it is low-foam and shows its ingredients. Be careful with a claim that sounds scientific but has nothing behind it. If the seller will not state the ingredients, treat that as a reason to pass.

Fit for Your Floor and Your Home

Check the floor types the listing names, and whether it mentions pets or children, as Roborock's own page does for its bottle. Also check the return terms, so a bottle that leaves residue or a smell can go back. And remember that the robot and the dock are the expensive part: saving a few dollars on liquid is a poor trade if it costs you a repair.

Which Roborock Models Have Auto-Dosing

Detergent dosing is a dock feature, and it is not on every Roborock. Below is what the listings and Roborock's pages let us say about three models we feature. We read the Creators API listings on November 19, 2026, and where a listing does not mention a dispenser, we write that it is not stated, which is not the same as saying the model does not have one.

Roborock Docks and Detergent Dosing

Specifications are from the listings and from Roborock's pages. Check your exact model's manual for the way it handles cleaner.

  1. 1Dock that doses detergent

    Roborock Saros 10

    The listing describes an auto detergent dispenser alongside self-refilling and hot water mop self-cleaning, and Roborock's support article on the Saros 10 multifunctional dock also says the dock has an auto detergent dispenser. Both Roborock sources agree. See our <a href="/best-robot-vacuums/roborock-saros/">Roborock Saros guide</a> for the model itself.

    Check price on Amazon

  2. 2Dock dosing not stated in the listing

    Roborock Qrevo S Pro

    The listing we read does not mention a detergent dispenser or cartridge, so we cannot tell you it dispenses detergent. Treat the cleaner question as a manual-tank question unless the manual for your unit says otherwise.

    Check price on Amazon

  3. 3Dock dosing not stated in the listing

    Roborock Qrevo 2 Pro

    The listing states high-temperature mop self-cleaning and does not mention a detergent dispenser or cartridge. Dosing is not stated, so check the manual for your unit before you pour anything into it. More on the line in our <a href="/best-robot-vacuums/roborock-qrevo/">Roborock Qrevo guide</a>.

    Check price on Amazon

Dispenser details are from Roborock's support page and the product listings, read on November 19, 2026. Not stated means the page does not say, not that the feature is absent.

If you are choosing a Roborock partly for this feature, our Roborock reviews compare the current line. Consumables of every kind, from filters to mop pads, are collected in our Roborock replacement parts guide, and the routine upkeep that keeps a mop robot healthy is in how to clean a robot vacuum.

Roborock Cleaning Solution FAQ

More from our guides: Roomba cleaning solution

You can, but Roborock says to use only its own floor cleaner in the water tank, to prevent corrosion or damage. Dilute it as your manual says. The product page gives 1:200 and a support article gives 1:300. If your model has a solution cartridge, pour the solution in undiluted.
Roborock does not name vinegar in the pages we read. It recommends using only its own cleaning solution in the water tank and warns that other formulations could damage it. Since the maker recommends only its own bottle, putting vinegar in the tank goes beyond that guidance. Ask Roborock support first.
The Amazon listing, sold by Roborock, describes the solution as a floor cleaner for hardwood, tile and other hard floors. Roborock's own product page does not make a hardwood statement in the text we read. For a finished or waxed floor, check your flooring maker's care instructions as well.
Neither the listing nor the product page states how many runs a bottle covers, so we cannot give a number. The page gives one dosing example: 2.5 caps, or 20 ml, in 4 liters of water at 1:200. A 480 ml bottle holds about 24 such measures, so the amount depends on your tank and ratio.

Sources

  1. Roborock Support, Can I add cleaning solution into Clean Water Tank?, support.roborock.com, read on November 19, 2026 Source for the advice to use only Roborock branded floor cleaner in the water tank to prevent corrosion or damage. The article showed an update date of November 18, 2026.
  2. Roborock Support, Can I add cleaner to the water tank when mopping?, support.roborock.com, read on November 19, 2026 Source for the recommendation to use only Roborock cleaning solution, the warning about other formulations and bubbles, and the 1:300 dilution.
  3. Roborock Support, What can the Saros 10 Multifunctional dock do, support.roborock.com, read on November 19, 2026 Source for the Saros 10 dock having an auto detergent dispenser. The article gives no fill amount.
  4. Roborock Official Floor Cleaning Solution for Robot Vacuums, us.roborock.com, read on November 19, 2026 Source for the 480 ml size, the 1:200 dilution, the 2.5 cap (20 ml) in 4 L example, pouring it undiluted into a cartridge, compatibility with Roborock robots that mop, and the safety note on benzisothiazolinone.
  5. Roborock Qrevo S Pro, Qrevo 2 Pro, Saros 10 and floor cleaning solution product listings, Amazon US via the Creators API, read on November 19, 2026 Source for the solution's 16.23 fl oz size, the 1:200 ratio and hard-floor wording, and for the Saros 10 dispenser. The Qrevo S Pro and Qrevo 2 Pro listings do not mention a dispenser.

The RobotVacuumer letter

New robot vacuum picks and plain advice on choosing and living with one, about once a month.